Відео

You are prolly the goat of CX4 technical vids, thanks for this.

Thank you for the video. I’m sorry if this sounds like a dumb question, but where does the gas come from? Is the gas created from the ammunition when it is fired?

I've had the C9 for about 5 years. Using ball ammo and 8 round mag I don't remember a problem. However with the 10 round magazine I had to adjust it. I don't own but I have shot the new Yeat Canon. When new it had a couple of jams in the first 50 rounds.

should have left the spring stock

should have left the spring stock

All for $159.99 too 😂 I joke but in all honesty if u just polish the feed ramp these are pretty reliable. Wouldnt carry a dumbell on my waist but can be fun to abuse these bc they do work.my pops got the .40 hp & that thing barely kicks. Granted its like a 20lb dumbell but yeah 😂

Perfect with toast

I always enjoy mine. It's using those crappy magazines that are the issue.

I had a Jennings 9 like 20 years ago. Every time you fired it the magazine would fall out unless you had your pinky underneath it. 😂

👍👍👍 THANKS

Yes, loading this 410 could be enhanced.

For self-defense, run 110gr Magnums. You can train with 158gr 38's for similar recoil. This is a properly priced lightweight 357 magnum if you train properly. The Ruger LCR and S&W 340pd 357's are overpriced fir what they are...

Put some Break free on it . Lub anybody ?

thats dangerous, even if it should be cleared by youfirst

Love mine. Very accurate

It is a fun plinking gun, great for self defense, great for small game and even larger game. They call it buck shot for a reason. The ammo is also cheap and the KSG-410 is also very cheap. And yes the lower recoil is great for some women, children, elderly... or just people that do not shoot often and do not like bruises on their shoulder. I like the Ruger LCP-MAX too. If I had the money I would pick up both guns.

It's a good thing this isn't the first 605 video I watched or I'd get the impression that is very inaccurate... No offense. 😐

Thanks for the video

Crazy thing irrespective of 2A, I wouldn’t want to live in any of these states anyway.

I really like the Calico M950 submachine gun since the weapon was used in movies like Total Recall, I Come in Peace, Stone Cold, The Crow, Destination Vegas and Virtuosity. Awesome weapon of the 90's! 😊

the star wars pistol

Good video very informative, but those headset were OVER PRICED. Amazon has them for 185 dollars cheaper and most PTT don’t work on them. But you shouldn’t be wearing these for real firearms you could do some damage if you get a non working one. Tac-sky wouldn’t be bad choice neither if you’re going for something like this. I’m curious about that helmets they have on their page too. Maybe a review could be in the works 🤞🏼

Safety first and informative! Thank you

Me and my daughter favorite range firearm

Phoenix Arms no longer sells the safety lever or spring. You are supposed to return to the factory. Not sure what that would cost for someone who is not the original owner. The spring appears to be a very simple round wire. Bet I could make one, or have it made. I know there are videos on UA-cam on how to modify or add parts to make it work like a normal semi-auto pistol. May check them out. I'm sure the warranty expired on mine before I ever traded for it.

Will the rear sight work with an AR-15 A2 front sight ?

I still don't understand how the hammer (or striker) mechanism works

who sells firing pins? There was a NJ website that had them,but not now as of August 2024.

I own an erma la22 and have owned the stoeger lugar as well. The eema is easier to break down and reassemble. Mine is extremely accurate, fairly well balanced from the factory and my wifes favorite handgun. However, the gun ( mine at least) HATES the ammo with the light copper plating and will jam often. Mini mags perform the best in this firearm. Too much oil and poor cleaning will also cause tou some headaches.

3D Print those parts!

bought mine at Kmart....$90....scope sold separately....

Great light, I will try one.

Pretty good light.I use it for work everyday.Nice light for daily use.

Thank you so much for this excellent video. You helped me to accomplish this task.

I reviewed this light a few months ago, I keep it in the center console by daily driver. I really like the glass breaker bezel and it is incredibly bright. Really good review man!

Twice the mag capacity, and they give it a minus one for having to switch to the second magazine after getting a “click”

Thank you this was exactly what I was looking for.

This "going into battery" thing seems to be the main issue I'm having with my HP25A. I've had it for about a decade and never used it except for test firing twice. The slide has returned, feeding the next round after being fired, but after cleaning and "racking" to check reassembly, the slide catches on the hammer at the bottom of the firing pin rear plate and it's wearing that part of the hammer. This happens if the slide is moving slower than normal because I'm holding it while checking its movement. This video was posted almost a year ago. You have modified the Safety and posted how to do it. Have you done anything about the "going into battery" thing? Or has it worked itself out? I only noticed it after cleaning yesterday. I bought mine used from a pawn shop, so I have no idea how many rounds have been through it.

I picked one up recently just because the club I belong to decided to start having small bore 3-gun events. A .22 rifle and pistol with a .410 shotgun. And if you are using 3" shells, it starts to become a more effective self defense platform. You get 5 balls of 000 buck instead of 3. Of course, it cuts down on the magazine capacity a bit when using the longer shells. And if you someone of slighter stature, the recoil from the .410 loads isn't nearly as bad as 12 ga. That same gun in 12 ga. kicks like a mule.

How much the 1911 ejercito argentino

Excellent techniques with all the information needed for easy disassembly and reassembly!!! Reassembly is still a bit tricky for me, but I'm getting better. I haven't used my HP25A in over a decade and I remember what a PITA it was to disassemble, clean and reassemble last time, especially figuring out reassembly. It was long past time to clean it again, so I found your video. Thank you, Mr. Craig! I'll watch your HP22A video to see if I want to try to tackle the Safety modifications. (I performed the modifications. THANKS!) Can you help me, please? My slide is catching on the hammer when I bring the slide back slowly, like when testing a reassembly. When cocked, the hammer looks to be about the same height as yours, but it could be a little higher (and I think it must be). The hammer is catching on the bottom of the firing pin rear plate and wearing that part of the hammer. I think the slide would return OK after firing a round and load another round from the magazine, but the catching and wearing troubles me. Would you please make a video on repairing this? I took both Grip Panels off and checked for issues, but I don't really know what I'm looking for. Thanks in advance.

Finding a 0.05" Allen/Hex Driver is the catch. I have several driver sets Allen Wrenches and Hex Drivers, but none of them have a 0.05" Allen/Hex. 1/16" (0.0625") is my smallest. I watched out of interest, but I'll have to get one if I ever need to clean or replace the Firing Pin, Spring, etc. in my HP25A, which I'm sure is the same. Thanks, for later.

Thank you, Mr. Craig!!! Easy enough. Your guidance in preventing things from popping loose or out by holding the Safety Lever down is your warning from *Phoenix Arms HP25A Disassembly.* I'm so glad I found both. First, I cut a 1/2" length of a 1-1/2" x 16 Wire Brad nail for under the Magazine Spring. Then I put the Safety Lever in Safe and drew a line around the Magazine Release button with an Ultra Fine Tip Sharpie to show where to cut with a Dremel Cutoff disc. The Grip Panel still fits fine with the Wire Brad under the Magazine Spring. My search of your videos page for HP22A found several more videos of interest, so I'll search again for HP25A for things more specific to that one. I needed a Love This button for your videos. Thanks again, Sir.

As a left handed shooter I was hesitant to get the LCP Max but your video just made me change my mind and I’m getting it 👍

CASING, NOT CARTRIDGE I USED TO OWN 2 OF THESE JAM-O-MATICS. .... JUNK

Speaking of pennies, you could actually shoot pennies from these toy guns, if you really wanted to get your point across. Ouch!

Never seen a 5.7 round get mangled like that and I own 5 different 5.7 platforms

If you put the mag. 3/4 of the way in you can move the safety

whatever you do, DO NOT PULL THE TRIGGER DURING TAKEDOWN

Errrr. Fail 🛑